|
Type | Dimension (mm) | d | T | L | S | I | R | α° | r | HQ0201012 | 2 | 10 | 12 | 1 | - | 5 | - | - | HQ0341616 | 3.4 | 16 | 16 | 2.5 | - | 8 | - | - | HQ0461616 | 4.6 | 16 | 16 | 4 | - | 8 | - | - | HQ0541616 | 5.4 | 16 | 16 | 5 | - | 8 | - | - | HQ0641012 | 6.4 | 10 | 12 | 2 | - | 5 | - | - | HQ0641616 | 6.4 | 16 | 16 | 5 | - | 8 | - | - | HQ0402525 | 4 | 25 | 25 | 3 | 5 | 12.5 | 5 | - | HQ0842222 | 8.4 | 22 | 22 | 5.5 | - | 11 | - | - | HQ0942222 | 9.4 | 22 | 22 | 8 | - | 11 | - | - | HQ0802525 | 8 | 25 | 25 | 4.5 | 5 | 12.5 | 5 | - | HQ0803030 | 8 | 30 | 30 | 6 | 5 | 15 | 5 | 0.5 | HQ1003030 | 10 | 30 | 30 | 10 | 3 | 15 | 6 | - | HQ1403635 | 14 | 36 | 35 | 13 | 3 | 18 | 6 | - |
Allowable tolerances of L(length), T(width) and S(thickness) of tips are listed in the table below (mm) Basic dimensions | Tolerance | Basic dimensions | Tolerance | ≤6 | ±0.2 | ＞25~40 | ±0.6 | ＞6~12 | ±0.3 | ＞40~55 | ±0.7 | ＞12~25 | ±0.4 | | |
Allowable tolerances of the flatness are listed in the table below (mm) Basic dimensions | ≤8 | ＞18~30 | ＞30 | Tolerance | 0.15 | 0.2 | 0.25 |
|
